Email: postmaster@langfengmetallic.com Tel: +86-731-84874716
Follow us:
Position:Home > Download > Technical Article

hot product
More intuitive to see our products

Download
The principle of rubber vulcanized
Raw rubber become soft after being heated, encounter cold hardening and crisp, not easy to mold, easy to wear and tear, soluble in organic solvent such as gasoline, intramolecular has a double bond, easy to happen addition reaction, easy to become aging.
download>>
The role and application of thermal spray alloy powder
Thermal spraying is a surface enhancement technology,it has always been our important ew technology promotion projects.It uses electric arc, plasma arc, a gas such as oxygen in the form of heat, the metal or non-metallic material is heated to a molten or
download>>
The influence of microwave system from the organizational behavior in the reaction
In the absence of electromagnetic field, the direction of the reactant molecule collision will be sure to maintain a statistically isotropic. In electromagnetic field, more and more polar molecules in the role of orientation and the electric field is in t
download>>
Chromium carbide introdution
Chromium carbide, chemical formula Cr3C2, the relative atomic weight of 180.02, theoretical carbon content 13.344%, as a gray powder, rhombic crystal structure, a = 2.821, b = 5.52, c = 11.46, insoluble in water, acids and bases .
download>>
Milling complex workpieces in milling machining center
End mill machining centers mostly used spring clips Sets folder mode, when used in a cantilever form. In the milling process, the milling cutter may sometimes appear gradually extended from the tool holder, or even fall, resulting in scrapped parts of the
download>>
tantalum carbide powder transaction process
To provide procurement program, and to determine the specific chemical composition and particle size. There are a variety of testing methods of particle size in Langfeng Metallic material Ltd.
download>>
The end mill clamping
End mill machining centers mostly used spring clips Sets folder mode, when used in a cantilever form. In the milling process, the milling cutter may sometimes appear gradually extended from the tool holder, or even fall, resulting in scrapped parts of the
download>>
Zirconium carbide powder transaction process
To provide procurement program, and to determine the specific chemical composition and particle size. There are a variety of testing methods of particle size in Langfeng Metallic material Ltd. as follows
download>>
Microwave heating principle
Substances are divided into conductors, semiconductors, insulators. Insulator known as dielectric material, the dielectric material of polar molecules and non-polar molecules.
download>>
Description of the current situation of domestic and foreign research
Domestic and foreign basic method of manufacturing the surface composites: one is passing through the centrifugal and vacuum force making the alloy powder particles distributed on the mold surface, the obtained infiltration casting layer is dense, it does
download>>
Application status of microwave rubber vulcanization technology
Microwave rubber vulcanization technology has gotten rapid promotion since the 1970s, especially in the microwave continuous vulcanization of rubber production line in the production of rubber extrusion products application, its rapid development is unpre
download>>
Zirconium carbide powder
Zirconium carbide (ZrC) is an extremely hard refractory ceramic material,It is usually processed by sintering.It has the appearance of a gray metallic powder with cubic crystal structure. Has highly corrosionresistant and high surface activity, also has t
download>>
The basic types of relieving forming milling cutter
Relieving formming cutter is used for milling a workpiece surface forming special tools.Its blade-shaped silhouette design is calculated according to the workpiece, and it has high productivity, and to ensure interchangeability of the workpiece shape and
download>>
Microwave sintering Research Status Introduction
Microwave and radio, infrared and visible light is electromagnetic waves, only the microwave is a kind of high frequency electromagnetic wave, the frequency range of 0.3 ~ 300 GHZ, wavelength of 1 mm ~ 1 m.
download>>
The operation and installation of taper shank twist drill
Determining the feed rate: Feed rate is generally depend on people’s experience, the value is general 0.08-0.12mm / rotation or 0.6-1.0mm / sec, feed speed is a more critical element in drilling, different amount feed can form different iron, different ch
download>>
Microwave sintering technology advantages
The sintering temperature is significantly reduced, as compared with the conventional sintering, the maximum cooling rate of up to about 500 ℃.
download>>
Professional cutter grinding
Professional cutting tool grinding is more than the cutting edge renovation in conventional sense,the essence lies in optimizing the original parameter of cutter to achieve the perfect unification of cutting.
download>>
Proper use of carbide drills,cermet drills
Because Carbide quite valuable, the proper use of the drill so the proper use of cermet drill is moist important, and is the responsibility of each practitioner's responsibility. Proper use of carbide drills, cermet drills,tic cermet drills including the
download>>
Microwave Sintering Introduction
As with radio, infrared, visible light, microwaves are a kind of electromagnetic wave. Microwave is just a kind of very high frequency electromagnetic wave, also known as ultra-high frequency.
download>>
Application of integration tool
According to the International Association Secretary-General Luo Baihui mold research in domestic mold tool material selected by the user, the use of most of carbide cutting tools,Accounted for 64.1% .
download>>
Planetary ball mill operating instructions
These are the planetary ball mill operating instructions and precautions outlined hope customers can follow the correct procedure, so as to enhance the effect of reducing planetary ball mill planetary ball mill failure.
download>>
The principle of microwave sintering
Material of traditional heating mode is must be in the environment of the heating, heat transfer by convection, conduction, or radiation to table and material, again by the table is transmitted into the material, until thermal equilibrium is reached.
download>>
Planetary ball mill introduction
Planetary ball mill is a compacted, finely ground, sample preparation equipment used for nano-material disperse,and for new product development and small batch production of high-tech materials.
download>>
characteristics of aluminum
Characteristics of aluminum are as follows: Relative steel and high temperature alloys is concerned, it belongs to the soft metal, HRC hardness is not high, but it is less resilient. So the tool Xiangqiu relatively speaking, higher soft metal if to cuttin
download>>
 1 2 3 4 5 
Copyright © Hunan WISE New Material Technology Co.,Ltd. -all rights reserved. Site Index Product Index Technical Support:coverweb