Email: Tel: +86-731-84874716
Follow us:
Position:Home > News > News-In Company
Faster to find the product you want
Carbide Powder
Double Carbide & Compound Carbide Powder
Ti(C,N) Based Cermet
TiC based cermet
Tungsten carbide tile cutter wheel &glass cutter wheel
Planetary Ball Mill
Industrial Microwave Furnace
Plasma Transferred Arc (PTA) Carbide powders
Zirconia (YSZ) grinding media
VSI Crusher Spares
Hardfacing Flux-cored Wire
PCBN Insert
PCBN and PCD Blank

hot product
More intuitive to see our products

The safety technical regulations of open-tilting Press


1.The operator must put on work clothes , wear gauze masks and gloves yarn before working.

2. Impede equipment of operation must be cleared before work, and conduct a comprehensive inspection for equipment .

3.The operation must first have a try, to turn back in normal operation and adjust punch from stamping welding, then you can carry out.

4.Press in the process of operation, don’t reach into the press area.

5. Stamping machines can be operated independently, but also with a double operation. When doing a double operation, a person is on the press, another person is sitting on the right side, both should focus all attention on it.

6.If the press has fail during operation, you must stop processing.

7.Equipment protection devices must not be removed.

8.After work, turning off the power and making a cleaning.

Stay tuned for detailed product information company official, please

Pre:A large enterprise in Hebei did sintering experiments in Langfeng Metallic Material Ltd.

Next:What are the applications and case of hafnium carbide products?

Copyright © Hunan WISE New Material Technology Co.,Ltd. -all rights reserved. Site Index Product Index Technical Support:coverweb